Lincoln Electric IM635 RED-D-ARC GX 271Chopper LPG - Manual (Page 9)

A-1 INSTALLATION
GX 271 Chopper LPG
A-1
TECHNICAL SPECIFICATIONS - Red-D-Arc GX-271 LPG (K1680-1)
Make/Model Description Speed (RPM) Displacement Starting Capacities
System
Kohler 2 cylinder High Idle 3700 38.1 cu. in 12VDC battery Fuel: LPG cyl.
CH20S 20.0 HP @ Low Idle 2400 (624 cc) (Group 58, 435
Command® w/LP 3600 RPM Full Load 3500 cold crank amps)
Full Load Bore x Stroke Oil: 2.0 Qts.
4 Cycle 25A. Alternator 1.9 L
Air Cooled 3.03” x 2.64”
LPG Engine (77 mm x 67 mm)
Overhead Valves
INPUT - ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
30.3 in. 19.1 in. 43.8 in. 469 lbs.
770 mm 485 mm 1113 mm 212 kg.
OUTPUT - GENERATOR
Welding Output Volts at Rated Amps Duty Cycle 1 Max. OCV @ 3700 RPM
CC Stick/TIG, Pipe and CV Wire Welding
275 Amps 28 volts 100%
80 volts DC
300 Amps 25 volts 60%
Auxiliary Power 2
8,000 Watts, 60 Hz
120/240 Volts
100 % Duty Cycle
42 Volt Auxiliary Power for Wire Feeders
PHYSICAL DIMENSIONS
1. Duty cycle is based on a 10 minute period. This machine can be loaded to 300 amps for 6 minutes out of every 10 minute
period.
2. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.