Kushlan Products KPRC160 - Manual (Page 6)

Inspection and other services should always be carried out on hard and level ground with the
engine shut down.
Inspection and maintenance Service Tables
To make sure your plate compactor is always in good working condition before using. carry out the
maintenance inspection in accordance with Tables 1 through 3.
TABLE 1. MACHINE INSPECTION
ITEM Hours of Operation
(Starting Check) Every8 hours ( every day)
Loosened of lost screws Every8 hours ( every day)
Damage of any part Every8 hours ( every day)
Function of controlling system part Every8 hours ( every day)
Vibrator oil check Every 100 hours
Vibrator oil replacement Every 100 hours
V-belt (Clutch) Check Every 100 hours
TABLE 2. ENGINE CHECK
( For details, see separate engine manual)
ITEM Hours of Operation
Leakage of oil fuel Every8 hours ( every day)
Tightness of fastening Threads Every8 hours ( every day)
Engine oil check and replenishment Every8 hours ( every day)
(Replenish to specified Max. Level)
Engine oil replenishment At first 20 hours, then every 100 hours
Air cleaner cleaning Every 50 hours
CAUTION
These inspection intervals are for operation under normal conditions. Adjust your inspection
intervals based on the number hours plate compactor is in use, and particular working conditions.
CAUTION
Fuel piping and connections should be replaced every 2 years.
Daily Service
Check for leakage of fuel or oil.