Asus P4PE BP - Manual (Page 82)

3-14 Chapter 3: Software support
3.3.5 ASUS MyLogo2™
The ASUS MyLogo2™ is automatically installed when you install the ASUS Update
utility from the software menu.
1. Launch the ASUS Update utility.
2. When prompted for the BIOS update
method, select the option “Update
BIOS from a file.”
3. Specify the location of the BIOS file,
such as from a floppy disk. Click Next.
Before using ASUS MyLogo2 feature, use the AFLASH utility to make a copy of
your original BIOS file, or obtain the latest BIOS version from the ASUS
website.
Make sure that the BIOS item Full Screen Logo is set to [Enabled] is you wish
to use ASUS MyLogo2. See page 4-35.
Follow these steps to use ASUS MyLogo2.
4. From the selection that appears,
choose a logo image. Click Next.
5. When you click on an image, it
displays larger on the MyLogo2
screen.
If you wish, you may create your
own boot logo image in GIF, JPG,
or BMP file formats.