Asus P4PE BP - Manual (Page 23)

ASUS P4PE BP motherboard user guide 1-13
1.9 System memory
The motherboard comes with three Double Data Rate (DDR) Dual Inline Memory
Module (DIMM) sockets. These sockets support up to 2GB system memory using
184-pin unbuffered non-ECC PC2700/PC2100 (FSB533) or PC2100/PC1600
(FSB400) DDR DIMMs.
The following figure illustrates the location of the DDR DIMM sockets.
This motherboard supports different memory frequencies depending on the CPU
FSB (Front Side Bus) and the type of DDR DIMM.
CPU FSB DDR DIMM Type Memory Frequency
533 MHz PC2700 333 MHz
PC2100 266 MHz
400 MHz PC2100 266 MHz
PC1600 200 MHz
Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.
P4PE BP
®
P4PE BP 184-Pin DDR DIMM Sockets
80 Pins
104 Pins
Follow these steps to install a DIMM.
1. Unlock a DIMM socket by pressing
the retaining clips outward.
2. Align a DIMM on the socket such that
the notch on the DIMM matches the
break on the socket.
3. Firmly insert the DIMM into the socket
until the retaining clips snap back in
place and the DIMM is properly
seated.
Unlocked Retaining Clip
DDR DIMM notch