Johnson Level & Tool Mfg. 40-6522 User Manual

Page 9

Power On/Off
1. Press the power button to power on. The power indicator lamp

should light up and then the instrument will automatically level
itself, with rotation occurring once the unit is level.

2. Press the power button again to power off.
3. Pressing the red power button on the remote will power down the

laser beam and rotating beacon, but does not power off the laser.

Low Battery Indicator
If the battery indicator lamp is blinking, it means the
battery is low. To ensure operation, replace batteries
or charge the rechargeable Ni-MH battery pack.

Alarm If Beyond Range
If the instrument is inclined beyond its auto-leveling range of ±5°, it will
deliver an audible alarm, rotation will stop and the laser beam will flash.
You will need to re-position the instrument within its self-leveling range.

Height of Instrument (H.I.)
1. After powering on the instrument and entering into auto-level

status, press the TILT button. When the indicator light is on
(see figure), the instrument enters into TILT mode.

2. If the leveled instrument is moved or bumped, the head will stop

rotation and the TILT indicator light and laser beam will flash.

3. Pressing the vial button on either the keypad of the laser or

remote will allow the laser to relevel itself and the laser will stay
in TILT mode.

4. Press the TILT button on the laser keypad again to exit TILT mode.

3327H_Manuals 4/23/10 1:09 PM Page 9