Johnson Level & Tool Mfg. 40-6522 - Manual (Page 10)

10 ©2010 Johnson Level & Tool - Rev. 1
Speed Adjustment
After unit electronically self-levels, it rotates at its highest
speed. Press the speed adjustment button (see figure) on
either the laser keypad or remote to change the rotating speed.
Note: During the self-leveling sequence, this key is not functional.
Scan Mode
1. Press the scan mode button (see figure) on either the
laser keypad or remote to activate scan mode.
2. With the second press of this button, the unit emits a shorter
bright laser line.
3. With the third press of this button, the unit emits a bright laser point.
4. To return to rotating, press the speed adjustment button.
Rotating the Scan Line
1. Press the clockwise button on either the laser
keypad or remote and the scan line moves to the
right.
2. Press the counter-clockwise button and the scan
line moves to the left.
Slope Mode
1. Press the slope mode button once (see figure) on either the
laser keypad or remote to enter into the X-direction slope
mode.
- Press the button pointing to the left to shift
the slope angle to the left.
- Press the button pointing to the right to
shift the slope angle to the right.
3327H_Manuals 4/23/10 1:09 PM Page 10