American Power Conversion 750 VA - Manual (Page 4)

2
Positioning the UPS
Place the UPS where it will be used. The UPS is heavy. Select a location sturdy enough to handle
the weight.
Do not operate the UPS where there is excessive dust or the temperature and humidity are outside the
specified limits.
P LACEMENT
Mounting the UPS in a Rack
The UPS is heavy. To lighten it, you may remove the battery before mounting the unit in the rack
(Steps 1 and 2).
Step 1 Step 2 Caution: The battery is heavy.
Step 3
Install the UPS at or near the bot-
tom of the rack (Step 3).
Check to ensure the rack will not
tip after installing the UPS into
the rack.
0º- 40ºC (32º-104ºF)
0-95% Relative Humidity
2.5 cm (1 in.)