HATZ Diesel 2G40 H - Manual (Page 27)

Malfunctions Possible causes Remedy Chap.
26
At low
temperatures.
Starter motor does
not operate or en-
gine does not turn
over.
Engine ignites, but
stops running as
soon as the starter
motor is disen-
gaged.
In addition, if auto-
matic electrical en-
gine shutdown is
installed.
Starting speed too low:
- Oil too viscous.
- Battery inadequately charged.
Descrepancies in the electrical
system:
- Battery and/or other cable
connections wrongly con-
nected.
- Loose and/or oxidized cable
connections.
- Battery defective and/or not
charged.
- Stater motor defective.
- Defective relays, monitoring
elements etc.
Speed control lever not located
far enough in the start direction.
Device not disengaged.
Fuel filter blocked.
Fuel supply interrupted.
Stop signal from monitoring el-
ement for automatic shutdown
system (optional extra):
- oil pressure lost
- cylinder head temperature
too high.
- alternator has failed.
Replace and fill up with oil.
Check the battery, if necessary
contact a service station.
Check the electical system and
its components or contact HATZ
service station !
Move the lever to START posi-
tion.
Disengage the engine from the
device if possible.
Replace fuel filter.
Check the entire fuel supply
systematically.
Check oil level.
Clean cooling air system.
See workshop manual.
5.3.2.
4.1.1.
8.
8.
4.2.1.
5.4.1.
5.2.1.
5.3.4.