Elitegroup H61H2-M19 (V1.0) - Manual (Page 43)

Chapter 3
H61H2-M19 USER MANUAL
39
CPU Configuration
The item in the menu shows the CPU Configuration.

Version 2.15.1229. Copyright (C) 2012 American Megatrends, Inc.
Number of cores to enable in each
processor package.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset M.I.B III Boot Security Exit
CPU Configuration
Intel(R) Celeron(R) CPU G550T @ 2.20GHz
64-bit
Supported
Processor Speed 2200 MHz
Processor Stepping 206a7
Microcode Revision 28
Processor Cores 2
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualization Technology [Enabled]
CPU C3 Report [Disabled]
CPU C6 Report [Enabled]
Enhanced Halt (ClE) [Enabled]
F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Intel HT Technology (Not Supported)
This item shows that the computer supports Intel HT Technology or not.
Intel VT-x Technology (Supported)
This item shows that the computer supports Intel VT-x Technology or not.
Intel(R) Celeron(R) CPU G550T @ 2.20GHz
This is display-only field and diaplays the information of the CPU installed in your
computer.
64-bit (Supported)
This item shows the computer supports EMT64.
Processor Speed (2200MHz)
This item shows the current processor speed.
Processor Stepping (206a7)
This item shows the processor stepping version.
Microcode Revision (28)
This item shows the Microcode version.
Processor Cores (2)
This item shows the core number of the processor.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enable
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
Active Processor Cores (All)
Use this item to control the active processor cores.