Elitegroup EZ-Buddie2 D21 I4-3 Manual User Manual
Page 35
31
Hard Disk Boot Priority (Press Enter)
Scroll to this item and press
Phoenix – AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Item Help
1.
Pri. Master:
2.
Pri.Slave:
3.
Sec. Master:
4.
Sec. Slave:
5.
USBHDD0:
6.
USBHDD1:
7.
USBHDD2:
8.
Bootable Add-in Cards
Menu Level
Use <
↑> or <↓> to select a
device, then press <+> to
move it up, or <-> to move
it down the list. Press
↑ ↓ → ← : Move
Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
CPU L3 Cache (Enabled)
Users may see this function when the motherboard uses P4 Edition processor.
Leave this item at the default value for better performance.
Hyper-Threading Technology (Enabled)
This item is only available when the chipset supports Hyper-Threading and
you are using a Hyper-Threading CPU.
Quick Power On Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your sys-
tem start up faster. You might like to enable this item after you are confident
that your system hardware is operating smoothly.
First/Second/Third Boot Device (Floppy/Hard Disk/CD-ROM)
Use these three items to select the priority and order of the devices that your
system searches for an operating system at start-up time.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations locations for
an operating system if it fails to find one in the devices specified under the
First, Second, and Third boot devices.
Boot Up NumLock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
Gate A20 Option (Fast)
This item defines how the system handles legacy software that was written for
an earlier generation of processors. Leave this item at the default value.