Elitegroup Y10PT0 / Y11PT0 - Manual (Page 18)

P.16
Using built-in wireless connectivity (select models only)
With the built-in wireless connectivity of your Netbook , you
can access other wireless network enabled devices (such as Ac-
cessPoint network stations, Notebook computers, Personal Digital
Assistants, or digital projectors) wirelessly without the constraints
of network cables.
To connect with a Local Area Network (LAN) at home or in the
air station to make transmission possible. Outdoors in places such
about an account.
• Wireless LAN (WLAN) is available on select models.
• WLAN connectivity has limited range, depending upon the
equipment being used, the chosen frequency band, radio- wave
interference, and the physical landscape (including building
structure). Circumstances will vary depending upon your
particular situation.
Connecting to a wireless network
1. Make sure you are located within the wireless network service area.
2. To enable WLAN, press the + hotkey combination
a few times until the WLAN/Bluetooth indicator lights up.
3. Click on the WLAN icon
located at the lower right corner of the desktop. A list of
available wireless networks will be displayed.
4. Choose a network and then click Connect. If security
authentication is not required by the network you are
using, there will be a successful message showing that
you have connected to the network.
3. Click on the WLAN icon
located at the lower right corner of the desktop. A list of
available wireless networks will be displayed.
4. Choose a network and then click Connect. If security
authentication is not required by the network you are
using, there will be a successful message showing that
you have connected to the network.
Netbook User Manual