Elitegroup 259EN - Manual (Page 55)

■ chapter 4 upgrading your computer
Upgrading the Hard Disk Drive
Replacing the original drive with one of larger capacity can increase
the hard drive capacity of your computer. Depending on the model,
the computer may use 9.5 mm (height), 2.5-inch Ultra ATA type
hard disk drive or a 9.5 mm (height), 2.5-inch Serial ATA type hard
disk.
Before the upgrade: In order to find out what type of hard disk
drive the system uses, you need to follow the steps below to
remove the hard disk drive and identify the drive’s model number.
Then, look up the drive’s model number in the HDD manufacturer’s
website to find out what type of hard disk your notebook uses.
Be sure to make a backup copy of all your data before attempting
this operation.
Warning:
Hard drive upgrade is a delicate process. Please observe the following
instructions carefully or have a qualified technician install it for you. Damages due to
mishandling of this procedure are NOT covered by the manufacture’s warranty.
Warning:
Apply care when handling the hard disk.
„ Do not drop or apply any shock.
„ Do not press on the cover.
„ Do not touch the connector with your fingertips.
„ Mishandling of the hard drive can result in permanent loss of data. Make a
backup copy of the drive s content before you remove it.
Note: Certain models that come with the IBM-brand hard drive emit a clattering
sound when it is being rattled. This is a normal condition.
4-2