Elitegroup L373N1 v.6 - Manual (Page 4)

¦ chapter 4 trouble shooting
4-4
Audio Problems
No speaker output -
?? Turn up the volume dial located at the bottom left edge of
the computer. See Chapter 1 for its location.
?? Software volume control is turned down in Microsoft
Sound System or is muted. Double-click the speaker icon on the
lower right corner of the taskbar to see if the speaker has been
muted or turned down all the way.
?? Most audio problems are software-related. If your
computer worked before, chances are software may have been
set incorrectly.
?? Go to [Start > Control Panel] and double-click the
Multimedia icon (or Sounds and Audio Devices icon). In the
Volume or Audio page, make sure that Realtek AC97 Audio is
the default playback device.
Sound cannot be recorded -
?? Double-click the speaker icon on the lower right corner of
the taskbar to see if the microphone has been muted.
1. Click Options and select Properties.
2. Select Recording and click the OK button.
3. After Click OK button, the recording volume control panel
will appear.
?? Go to [Start > Control Panel] and double-click the
Multimedia icon (or Sounds and Audio Devices icon). In the
Volume or Audio page, make sure that Realtek AC97 Audio is
the default playback device.
?? For best audio recording, the distance to the built-in
microphone should be no more than 30cm.