Elitegroup G400 - Manual (Page 35)

27
To remove a disk, do the following:
1. Check the LED display and make sure that the computer is not
accessing the CD-ROM/DVD-ROM/Combo drive.
2. Push the eject button and pull the tray all the way out.
3. Carefully pick up the CD disk by the edges and – while
pressing down on the center ring – remove the CD-ROM/DVD-
ROM/Combo from the tray.
Do not insert any foreign objects into the disc tray. If you
experience difficulty when ejecting the CD disk tray, stretch a paper
clip (or use a pin or a thin metal rod) and insert it into the emergency
eject hole located on the right side of the front panel. The CD disk
tray should eject immediately. This procedure can also be used to
remove a CD from the drive when the Notebook is powered off.