Elitegroup G400 - Manual (Page 27)

19
Getting Started
C ONNECTING TO A P OWER S OURCE
C ONNECTING THE AC A DAPTER
A universal AC adapter is provided to supply your computer with
power and also charge the computer’s battery pack. The adapter’s
AC input voltage can range anywhere from 100 to 240 volts,
covering the standard voltages available in almost every country.
The power cord for the AC adapter requires a three-hole grounded
AC outlet. To connect the computer to an external power source:
1. Plug the AC adapter’s connector into the DC-IN connector on
the right of the computer.
2. Connect the power cord to the AC adapter and then to a wall
outlet.
Do not use inferior extension cords as this may
result in damage to your Notebook. The Notebook comes with its
own AC adapter. Do not use a different adapter to power the
computer and other electrical devices.