Elitegroup 259IA3 Instanton - Manual (Page 11)

11
‰
Step 1. Download and Upgrade in Windows
First off all, user must download the update components from (Enter URL) and unzip the download
file.
‰ Step 2. Complete Update in InterVideo InstantON
Steps for Updating in InterVideo InstantON
The updating procedure uses the following steps:
1.
Enter InterVideo InstantON.
2.
Enable the Setup menu.
3. Select “General Settings” in the Setup menu.
4. Select “Update” in the General Settings menu.
InterVideo InstantON will check the availability of a new update. If there is no later version of
InterVideo InstantON available, the system will display an error message and then resume
operation in the previous AV mode.
5.
If there is a later version available for updating, InterVideo InstantON will confirm the update. If
the user decides not to do so, InterVideo InstantON will resume operation in the previous AV
mode. If the user chooses “Yes,” the InterVideo InstantON will continue the updating process.
6. During updating InterVideo InstantON will shut down all applications. Thus, the screen will
become blank. The updating process will take approximately 15 to 20 seconds.
7. Once the update is complete, InterVideo InstantON will automatically shut down.
Note: If a serious error should occur during the updating process and cause InterVideo InstantON to
malfunction, please use the recovery disc to repair the damage and restore the system to normal
status.
Example of an error message for updating: No update available