Elitegroup A907 (VD) - Manual (Page 61)

49
BootUp Num-Lock
Set this option to configure the system numlock key on your keyboard.
Ø The settings are On or Off (default value)
TouchPad Support
Set this option to enabled or disabled the touchpad. The default setting is Enabled.
Password Check
This option enables password checking every time the system boots or when you run AMIBIOS
Setup. If Always is chosen, a user password prompt appears every time the computer is turned
on. If Setup is chosen, the password prompt appears if AMIBIOS is executed.
ACPI Standby State
This application is used to set your system to standby mode.
•
If it is set to "S1/POS " state, the wake up process will be faster and the system data will
not be lost while the DeskNote enters the standby mode.
•
If it is set to "S3/STR " state, the wake up process will be slower and the system
data will lost while the DeskNote enters the standby mode.
Ø The settings are S1/POS (default value) or S3/STR