Elitegroup A907 (VD) User Manual
Page 6
vi
16.
The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or
less than 70 dB(A).
17.
Power Cord Requirements
The power cord set used with the AC adaptor must meet the requirements of the country
where you use the AC adaptor, whether it is 100-120 or 200-240 Vac. The following
information explains the requirements for power cord set selection.
•
The cord set must be approved for the country in which it is used.
•
The appliance coupler must have a configuration for mating with a
CEE22/EN6032/IEC 320 appliance inlet.
A.
For U.S. and Canada:
•
The cord set must be UL Listed and CSA Certified.
•
The minimum specifications for the flexible cord are No. 18 AWG.
B.
For Japan:
•
All components of the cord set must bear a “ T ” mark and registration number in
accordance with the Japanese Dentori Law.
•
The minimum specifications for the flexible cord are .75m㎡ conductors.
C.
For Other Countries:
•
The cord set fittings must bear the certification mark of the agency responsible for
evaluation in a specific country.
•
The flexible cord must be of a HAR (harmonized) type H03VV-F.
•
The cord set must have a current capacity of a least 2.5 Amperes and voltage rating
of 125 or 250 Vac.