Elitegroup 532 User Manual
Page 74
Be sure to first remove the current audio device from your system. Please follow the
instruction on the installation of audio driver.
The display screen is dark
Make sure that the computer is not in Suspend mode. Check the Brightness controls for
the screen. If the controls are turned too far down, the screen will be dark.
An incorrect date and time are displayed.
Correct the date and time using the DOS DATE and TIME commands or the options in
the Setup Utility. If the date and time become incorrect after a short time, your CMOS battery may
be depleted. Contact your dealer to change the battery.
You hear irregular beeps during operation of the Notebook and the system halts.
The problem is beyond the scope of this manual. Contact technical support.
An unidentified message is displayed.
Reboot the computer and run the BIOS system setup. Confirm the Setup parameters.
If the same message is displayed after booting up again, contact technical support for assistance.
The system cannot access the CD-ROM/DVD-ROM drive.
Check that a CD is properly inserted in the drive. Make sure that you are using the
correct program for that kind of CD. For example, the system cannot read a data CD using an
audio program.
You cannot operate the printer.
Check the printer cable connection. Ensure that the printer power switch is turned on.
Confirm that the printer is on-line.
66