Elitegroup AG400T8-D64 (V1.0) User Manual
Page 13

Chapter 2: Hardware Installation
9
♦ 3DVR Connector—3DCON1
You can connect a 3D glass device to obtain the 3D effect on
the screen.
♦ TV-Out Composite/S-Video Connector—RCA1/SCON1
AG400T8-D64 provides the Composite/S-Video connectors
for video-out function, which allows you to connect the TV or
video input device.
♦ VGA Connector—CRT1
AG400T8-D64 provides a standard VGA connector that
allows you to connect a CRT monitor. Simply plug your
monitor cable into the VGA connector on your card, and make
sure that the other end of the cable is properly connected to
your monitor.
Installing the Card
To install AG400T8-D64 card to your computer, please follow
the steps below:
1. Unplug the computer and remove the cover.
2. Insert the graphics accelerator card.
2-1. Locate the AGP slot on your mainboard.
2-2. Grasp the AG400T8-D64 accelerator card by edges.
2-3. Align it with the empty AGP slot on the mainboard
and gently insert it into place. Make sure the card
evenly and completely seated in the slot.
3. Reconnect all cables and replace the cover.