Elitegroup AG200 Series VGA Card - Manual (Page 7)

Chapter 2:Hardware Installation
Chapter 2
Hardware Installation
Follow these instructions to install this AG200 Series VGA card.
Package Contents
Attention: This VGA Card series has five models. Please check
with your vendor to make sure you have bought the product you
really want.
Model Specification
AG200T8-D64
Xabre200+SiS301, 64MB DDR
AG200E8-D64 Xabre200, 64MB DDR
AG200SL-32 Xabre200, 32MB SDR
AG200SP-64 Xabre200, 64MB SDR
AG200F-64TD Xabre200+SiS301, 64MB DDR
AG200E4-D32 Xabre200, 32MB DDR
Your card package should contain the following items:
♦ This User’s Manual
♦ The VGA card
♦ Super software pack
♦ One cable (optional)
♦ One adapter (optional)
Unpacking
♦ The card contains sensitive electric components, which can be
easily damaged by static electricity, so the card should be left
in its original packing until it is installed.
♦ Unpacking and installation should be done on a grounded
anti-static mat. The operator should be wearing an anti-static
wristband, grounded at the same point as the anti-static mat.
♦ Inspect the card carton for obvious damage. Shipping and
handling may cause damage to your card. Be sure there are no
shipping and handling damages on the card before
proceeding.
DO NOT APPLY POWER TO YOUR SYSTEM IF THE
CARD HAS BEEN DAMANGE.
5