Nilfisk-ALTO BSG81 - Manual (Page 8)

15 14
Close the base.
Refit the dust container into the vacuum cleaner,
position the carrying handle at the side and close the
dust bag compartment lid.
! Note: The inside of the dust container may
become scratched with use and start to look
opaque. This does not, however, affect the
performance of the vacuum cleaner in any way,
i.e. it will continue to function as normal.
Grip the dust container by the carrying handle and
remove it.
If the base is very dirty (thick dirt) clean this first e.g. by
vacuuming using the crevice tool.
(Fit a MEGAfilt
® SuperTEX dust bag in the vacuum
cleaner when you do this)
Press the latch in the direction of the arrow to open the
base and empty the dust container by pressing the lid
lock in the direction of the arrow.