Nilfisk-ALTO BSG81 - Manual (Page 13)

25 24
Maintenance
Ⅲ Before the appliance is cleaned, ensure that it has been switched off and unplugged.
Ⅲ Vacuum cleaners and accessories made of plastic can be cleaned using a damp
cloth.
Do not use scouring agents, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water!
Ⅲ If necessary, the dust compartment can be cleaned using another vacuum cleaner,
or simply cleaned with a dry dust cloth / dust brush.
Use a pair of scissors to cut through any threads or
hair that has become wrapped around the brush roller.
Always unplug the vacuum cleaner from the power outlet before carrying out any work
on the electric brush!
All other service and maintenance work must be performed only by authorized service
personnel.
Subject to change without notice.
Vacuum up the threads and hair using the crevice tool.
Spare parts and optional accessories
Replacement dust bag packaging BBZ52AFP1UC
contains :
5 MEGAfilt
® SuperTEX replacement dust bags with
auto-seal
1 Microsan filter
1 protective motor filter
HEPA filter BBZ151HFUC
Recommended for allergy sufferers. Purifies the
discharge air so that it is cleaner than the normal
ambient air. Filters even such small particles that it
complies with the European standard for clean air of
HEPA class 12.
Activated carbon filter BBZ190AFUC
Extra thick activated carbon cushion permanently
prevents irritating odors.
May only be used in conjunction with the discharge
filters on the BSG8.. series.
Turbo brush for floors BBZ 101TBUC
Brushes and vacuums simultaneously. Suitable for all
floors. Good pick-up of fluff, threads and hair.
Flattened pile is restored. Side air control for adapting
roller speed to floor type. The brush roller is driven by
the suction power of the vacuum cleaner.
No electrical supply required
Brush for parquet and hard floors BBZ 121HDUC
Specially for parquet and sensitive hard floors
Fitted with 2 castors and extra soft bristles, glides
over floors effortlessly, taking up dust, dirt from cracks
and crevices.