Nilfisk-ALTO BSG81 User Manual

Page 6

After work

Ⅲ Switch the vacuum cleaner off and unplug the

power cord.

Ⅲ Tug the power cord and let go. The power cord then

winds itself up automatically.

Ⅲ On vacuum cleaners with an electronically operated

power cord reel, the power cord is automatically
wound up when you pull the plug out of the wall
socket.

Ⅲ If you want to stop the cord from rewinding

completely (e.g. when moving the plug), you can tug
on the cord to stop it from rewinding.

Ⅲ You can activate or deactivate the power cord

brake by pulling or tugging the power cord.

When you stop cleaning for a moment, you can use
the parking aid at the back of the vacuum cleaner.
Switch the electric brush to »OFF« mode first.
Slide the plastic tab on the nozzle connector into the
groove at the back of the vacuum cleaner.
The vacuum cleaner will switch itself off.

Vacuuming with accessories

Pull the 4-in-1 accessory in the direction of the arrow
to remove it from the accessory holder.

a) Crevice nozzle

For vacuuming in crevices and corners. For difficult
to get to places, the 4-in-1 accessory can be
extended in two stages to 14 inches (or 360 mm)
by pulling out the crevice nozzle.

Ⅲ Extend the crevice nozzle to the second stop until

you can hear it engage.

Ⅲ To push the crevice nozzle together again, release

the telescope lock (by pressing in arrow direction).

b) Upholstery nozzle

For cleaning upholstery, curtains, etc.

c) Furniture brush

For window frames, cabinets, lamp shades etc.
Ⅲ Fold the upholstery nozzle over in the direction of

the arrow.

Ⅲ To extend the brush ring, turn in the direction of

the arrow.

Ⅲ Before replacing the 4-in-1 accessory in the

accessory holder, retract the bush ring and fold
the upholstery nozzle back.

Caution: to prevent damage to the nozzle / furniture
brush, fold the upholstery nozzle out only when the
furniture brush is retracted.

CLICK!