Davey MaxiFlow SPA POOL PUMP User Manual

Page 8

POWER CONNECTIONS AND WIRING MUST BE CARRIED OUT

BY AN AUTHORISED ELECTRICIAN.

DANGER - Hazardous suction. Do not block water entry into

filtration system with any part of your body as the pressure can

trap hair or body parts, causing severe injury or death. Do not

block suction. Turn off pump immediately if someone becomes

trapped.

Caution! Do not add chemicals directly to the pool skimmer or

suction. Adding undiluted chemicals may damage pump and

filter and void warranty.

The appliance is not intended for use by young children or

infirm persons without supervision. Young children should be

supervised to ensure that they do not play with the appliance.

Routine Maintenance tasks – to maximise the life of your pool

equipment & personal safety, use this checklist once a week.

Turn pump off first.

a. Make sure that any pressure gauges are in working condition and

the operating pressure is within limits as specified on the product.

b. Make sure that each suction inlet, and main drain has a cover that is

securely attached and in safe working condition.

c. Make sure that all skimmer covers are securely attached and in safe

working condition. These should be replaced every 3 to 4 years.

d. Remove any obstructions or debris from the main drain cover.

e. Ensure the skimmer baskets and any pump hair and lint pots are

free of leaves and debris at least once a week.

f. Remove obstructions and combustibles from around the pump

motor.

g. Make sure all wiring connections are clean and that all wiring and

electrical equipment is in good condition. Damaged wiring must be

repaired or replaced by a qualified electrician as soon as damage is

discovered.

h. Check water balance and sanitiser levels at your local pool shop.

WARNING! Pump suction is hazardous and can trap and drown

or disembowel bathers. Do not block suction. Do not use or

operate swimming pools, spas or spa baths if a suction cover is

broken, missing or loose. Two suction covers and inlets must be

provided into every pump to avoid suction entrapment.