Davey MaxiFlow SPA POOL PUMP - Manual (Page 3)

3
Prior to using this pump you must ensure that:
• The pump is installed in a safe and dry environment
• The pump enclosure has adequate drainage in the event of leakage
• Any transport plugs are removed
• The pipe-work is correctly sealed and supported
• The pump is primed correctly
• The power supply is correctly connected
• All steps have been taken for safe operation
Appropriate details for all of these items are contained in the following Installation
and Operating Instructions. Read these in their entirety before switching on this
pump. If you are uncertain as to any of these Installation and Operating Instructions
please contact your Davey dealer or the appropriate Davey office as listed on the
back of this document.
Your Davey MaxiFlow
Congratulations on your purchase of a quality product from the Davey range of
Pool and Spa Equipment. You are assured of many years of reliable and efficient
performance from your Davey MaxiFlow backed by Davey’s two year guarantee.
Davey MaxiFlow™ have been designed to circulate swimming pool and spa water
in conditions set out in the Australian Standard for swimming pool water quality
(AS 3633) or equivalent. They should not be used for any other purpose without first
consulting your Davey Dealer or the Davey Customer Service Centre.
The matched motor and “pumping end” are designed to provide dependable
operation while delivering maximum water flow.
Every Davey MaxiFlow is thoroughly tested during manufacture.
The Davey Water Products Maxiflow Pump has been designed to meet the needs
of OEM spa builders it is a booster / spa pump. Spa booster pumps keep the
spa water circulating. If the spa is heated they ensure a good water flow over the
heater element. They may also drive jets to aerate the water (this function may be
achieved with the addition of a blower motor). A spa pump will generally be required
to deliver a high flow of water, which will make its design different from other types
of pump. This type of pump will generally have its outlet on the side of the housing,
which is more conducive to high flow requirements