DataComm 70-0048 Universal Router Bracket - Manual

3/13/08 Rev. 1
Instruction / Installation Sheet
DataComm Electronics Universal Router Bracket 70-0048
Use DataComm Electronics’ universal router bracket to install any router or modem in
any structured media enclosure. Just follow the hole pattern for installing the new
universal bracket into any structured media enclosure. Insert the black push pins into
the required hole patterns below. Each manufacturer has a different hole pattern.
After installing the universal bracket into the structured media enclosure, just push the
three metal retaining arms towards the back of the enclosure until the desired width of
the router or modem is achieved. Then insert the router or modem into the universal
router bracket. The black plastic tips on the retaining arms will hold the router or modem
in place without scratching or damaging the router or modem.
DataComm Electronics, Inc.
6349 Peachtree Street
Norcross, GA 30071-1725
888.223.7977
770.662.8205
www.datacommelectronics.com
ETL LISTED
CONFORMS TO
UL STD 1863
ANSI/UL STD 60950-1
CERTIFIED TO
CAN/CSA STD C22.2 NO 60950-1
3026001