Burcam 300521 HOT WATER RETENTION PUMPING SYSTEM (GENIE) - Manual (Page 6)

TROUBLE SHOOTING GUIDE CHECKLIST
NEVER MAKE ADJUSTMENTS TO ANY ELECTRICAL APPLIANCE OR PRODUCT WITH THE POWER
CONNECTED. DON’T JUST UNSCREW THE FUSE OR TRIP THE BREAKER, REMOVE THE POWER
FROM THE RECEPTACLE.
TROUBLE PROBABLE CAUSE ACTION
Switch is off position
Blown fuse
Tripped breaker
Improper timer setting
Defective motor
Closed ball valves
Improper voltage
Clogged impeller
Excessive friction in pipe
Improper voltage
Improper timer setting
Improper timer setting
Turn switch to on position
Replace
Reset
Check the timer
Replace
Open the valves
Check voltage
Clean
Too small or clogged pipe
Check voltage
Check the timer
Check the timer
Motor does not run.
Motor runs but no
water is delivered.
Pump does not
deliver to full
capacity.
Pump does not shut
off.
Pump starts and
stop too often.
TO THE END CONSUMER
If you have any problems with the product, before advising the
store, where you’ve purchased the pump, please contact us
at 514 337-4415 , and ask for our sales department, and they
will be pleased to help you with any questions you might have,
concerning your installation.
6
FOR INFORMATION TEL: 514.337.4415 FAX: 514.337.4029