Brocade Using the Brocade Structured Cabling Components - Manual (Page 4)

4 of 16 Using the Brocade Structured Cabling Components
Publication Number: 53-1001475-01
mRJ-21 procedures
The following procedure demonstrates securing up to eight RJ-21 cables into the Cable CInch. When securing fewer
than the maximum cables, follow the procedure to secure the desired number of cables and simply wrap the
remaining hook and loop strap around the Cable CInch. Use the additional slots in the clip to secure groups of cables
as required.
Cable cinch with two mRJ-21 cables
To secure two mRJ-21 cables, place the hook and loop strap through slot one and use the front and rear left
recesses as shown in
Figure 2 .
FIGURE 2 Two mRJ-21 cables