Brocade VDX 8770-4 Four-Post Flush Mount Rack Kit Installation Procedure - Manual (Page 6)

8 of 10 Brocade VDX 8770-4 Four-Post Flush Mount Rack Kit Installation Procedure
Publication Number: 53-1002669-01
NOTE
For posts with round holes, use the clip nuts on the rack posts for securing 10-32 screws. For posts with square
holes, use the retainer nuts. Refer to
Figure 3 .
FIGURE 3 Using clip nuts and retainer nuts to secure screws to the rack uprights.
Install the VDX 8770-4 in the rack
5. Move the lift with the switch in front of the rack and adjust the height to match the installed rails.
6. If applicable, lock the wheels of the lift.
CAUTION
Use safe lifting practices when moving the product. (C015)
7. Gently slide the switch onto the rack, ensuring that it remains supported during the transfer. See Figure 4 .
1 Clip nuts 3 Retainer nut
2 Round hole rack rail 4 Square hole rack rail
1
3
2
4