Brocade VDX 8770-4 QuickStart Guide - Manual (Page 6)

6 of 32 Brocade VDX 8770-4 QuickStart Guide
Publication Number: 53-1002554-01
Danger notices
A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. A
lightning bolt symbol accompanies a danger notice to represent a dangerous electrical condition. Read and
comply with the following danger notice before installing or servicing this device.
DANGER
Use the supplied power cords. Ensure the facility power receptacle is the correct type, supplies the
required voltage, and is properly grounded. (D004)
Caution notices
A caution notice calls attention to a situation that is potentially hazardous to people because of some existing
condition. Read and comply with the following caution notice before installing or servicing this device.
CAUTION
Use safe lifting practices when moving the product. (C015)
ESD precautions
The Brocade VDX 8770-4 contains ESD-sensitive FRUs. When working with any Brocade VDX 8770-4 FRU, use
correct electrostatic discharge (ESD) procedures.
• Wear a wrist grounding strap connected to chassis ground (if the Brocade VDX 8770-4 is plugged in) or a
bench ground. Refer to
Figure 1 on page 7 for the location of the ESD jack.
• Store ESD-sensitive components in antistatic packaging.
Brocade VDX 8770-4, port side
NOTE
Airflow in the Brocade VDX 8770-4 is from the port side and left side (viewed from the port side) to the rear (fan side)
of the switch.
Figure 1 displays a sample configuration of the port side of the Brocade VDX 8770-4.