ReadyLIFT Dodge Ram 2500/3500, 2009-2013, 4WD Only - 8 LUG - 5.0F/2.0"R Lift Kit" - Manual (Page 6)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-1000
6
Install the f. brake line extension brackets L & R 25. Re-align the drive line to the f. axle and install. 26.
Install new ReadyLIFT® extended coils and shocks.
**** Max Length shock is 28 inch’s extended ****
Spring Compressor may be needed. If spring compressor is not available you
can disconnect upper arms to get a little extra clearance for installation.
21. Install the track bar into the drop bracket. 22.
Loosen tie-rod adjuster and swivel the end around 180 degrees. Insert the tie-
rod into the pitman arm and tighten. Re-tighten the tie-rod adjuster.
23. Install extended sway bar end links and adapter brackets. 24.
Support the rear axle and remove the shocks 27.
Unbolt the u-bolts one side at a time, then lower the axle enough to
install the block. Install new u-bolts and torque down.
28.