ReadyLIFT Dodge Ram 2500/3500, 2009-2013, 4WD Only - 8 LUG - 5.0F/2.0"R Lift Kit" - Manual (Page 3)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-1000
3
IMPORTANT
ReadyLIFT® Arms/links come preset to length but may
need to be adjusted per application for alignment rea-
sons and/or to eliminate possible tire rub. The front
shocks maximum extended length is 28 inch’s (center
mounting point to center mounting point) and the mini-
mum collapsed length is 19 inches or shorter. If shocks
are too long it will cause drive line issues. It is the
installers responsibility to insure the correct length
shocks are installed and drive lines are smooth and free
of any binding.
Bill of Materials
Measure Vehicle per instructions on previous page 1. Raise the vehicle and support the axles. 2.
Remove the wheels from the vehicle. 3. Remove the sway bar end links from the vehicle. 4.
DESCRIPTION QTY
Sway Bar End Links 2
Endlink Adptors 2
1/2 - 20 x 2.75 Hex Machine Bolt 2
1/2 - 20 x 1.5" Hex Machine Bolt 2
1/2" SAE Flat Washer 15
1/2 - 20 Top Lock Hex Nut 8
Track Bar Relocation Bracket 1
Spacer 1.365L x .630 id x 1.250od 1
1/2 - 20 x 1.5" Hex Machine Bolt 1
1/2" Flat Fender Washer O.D. 1.250" 1
5/8 - 18 x 3 1/2" Hex Machine Bolt 2
DESCRIPTION QTY
5/8 - 18 Nylok Nut 4
5/8" SAE Flat Washer 4
Johnny Joint Upper Arms 2
Johnny Joint Lower Arms 2
Brake Line Relocation Bracket 1
Brake Line Relocation Bracket 1
5/16-18 x .75" Hex Machine Bolt 2
Pitman Arm 1
5" Spring-Black Powdercoat 2
Extended Bump Stops 2
Block Kit 1