ReadyLIFT Dodge Ram 2500/3500, 2009-2013, 4WD Only - 8 LUG - 5.0F/2.0"R Lift Kit" User Manual
Page 4
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-1000
4
Mark the f. drive shaft for proper alignment during reassembly. Unbolt
and slide the drive line back to allow the axle to droop out.
9.
Fully support the f. axle and remove the shocks from the top first.
10.
Remove the tie-rod from the pitman arm. You may need to brake loose
with a hammer.
5.
Remove the track bar from the frame side of vehicle.
6.
Remove the pitman arm from the vehicle.
7.
Unbolt and remove the f. brake line brackets from the axle.
8.
Loosen and remove the lower shock bolt.
11.
Lower the f. axle to remove the springs and the shocks. Re-
move the shocks and coil springs at the same time.
12.