ReadyLIFT GMC Envoy SST Lift Kit, 2002-2009, 2WD & 4WD - 2.0F/1.0"R" User Manual
Page 5
ReadyLift
®
(Part# 69-3065)
2002-2008 Chevy Trailblazer/GMC Envoy
Installation Instructions
Revised
12-30-08
ReadyLift Suspension, Inc.
3201 W. MacArthur Blvd, Santa Ana, CA, 92704
T o l l F r e e ( 8 8 8 ) 9 2 2 - 2 2 9 4 Fa x 7 1 4 -8 6 2 -2 9 7 2
Please read instructions thoroughly and completely before beginning installation.
Check www.Readylift.com for any installation instruction updates
Installation by a trained mechanic is recommended.
Starting in the driver side, unbolt the upper sway bar end link. Unbolt the lower shock.
Lower the jack enough to remove the coil spring and isolator. Take the isolator and install it into the ReadyLift coil spacer.
17.
20.
19.
18.
Unclip the ABS Line from the frame rail on both sides. Use a
jack to support the rear axle.
16.
REAR INSTALLATION
Position truck on a flat surface and lift vehi-
cle by the frame so that the rear wheels are
off the ground. Use a minimum 3 ton jack
stands and place under frame for safety or a
(2) two post lift if available. Make sure that
the emergency brake is on and the
front wheels are blocked to prevent a
rollout. Remove the rear wheels
15.