Readylift, Bill of materials – ReadyLIFT GMC Envoy SST Lift Kit, 2002-2009, 2WD & 4WD - 2.0F/1.0"R" User Manual
Page 2

ReadyLift
®
(Part# 69-3065)
2002-2008 Chevy Trailblazer/GMC Envoy
Installation Instructions
Revised
12-30-08
ReadyLift Suspension, Inc.
3201 W. MacArthur Blvd, Santa Ana, CA, 92704
T o l l F r e e ( 8 8 8 ) 9 2 2 - 2 2 9 4 Fa x 7 1 4 -8 6 2 -2 9 7 2
Please read instructions thoroughly and completely before beginning installation.
Check www.Readylift.com for any installation instruction updates
Installation by a trained mechanic is recommended.
Position truck on a flat surface and lift vehicle by the frame so that the front wheels are off the ground.
Use a minimum 3 ton jack stands and place under frame for safety or a (2) two post lift if available.
Make sure that the emergency brake is on and the rear wheels are blocked to prevent a rollout.
QTY
2
6
2
Description
Steel strut extensions - Front
M10 serrated flange nuts
Aluminum button shaped coil spacers - Rear
Remove the front wheels. Starting on the driver side, discon-
nect the ABS line from the support bracket at the knuckle.
Also disconnect the ABS line from the support bracket on the
upper control arm.
Loosen, but do not remove the two upper strut mounting nuts.
Unbolt the lower sway bar end link.
1.
4.
3.
2.
Bill of Materials