5 final pre-sound check check – Nexo RS User Manual
Page 45
![background image](/manuals/360968/45/background.png)
RS15
S
YSTEM
C
HECK
L
IST
Page
45/58
-
when listening from behind the system, switch the front drivers in and out. You should hear a
reduction in the LF range when the both front and rear drivers are on as compared to when the
rear drivers only are on;
-
When listening from the front, you should hear a strong increase in the LF range when
connecting the rear drivers.
• Raise the bumper, attach the next series of modules and repeat the above checks.
• Make sure that these series of modules sum properly with the modules above them.
9.5 Final Pre-Sound Check Check
• Play a CD track (preferably generous and periodic in the LF content) on the SUB output, mono
left, mono right and then both sides:
-
both sides must sound strictly identical when listening at the center;
-
level must not decrease at the center when playing left and right simultaneously as opposed to
one side only.
• Play the same CD track on the MAIN system, on the SUB system, then on both:
-
Inverting polarity on one of these outputs – MAIN or SUB - should always result in a massive
difference near the crossover point.