Nexo RS - Manual (Page 11)

I NTRODUCTION Page 11/58
As for all NEXO systems, the RS15 is controlled, powered and monitored by dedicated NEXO
TDControllers:
• GEO S12 TDController is based on PS analogue TDController design, and
provides full control for RS15 in omnidirectional mode associated to Geo
S12. It has 2 analogue inputs (Left and Right) and 3 analogue outputs
(RS15 Mono Omni, GeoS12 Left and GeoS12 Right);
• NX242-ES4 Digital TDController provides comprehensive control of RS15
loudspeakers in multiple configurations. It allows Ethersound TM digital
audio networking, as well as remote control for all units in the network. It
has 2 analogue / 4 digital inputs and 4 analogue / 4 digital outputs;
IMPORTANT : NX242 must be equipped with NX-Tension Card (ES4 or CAI)
to access RS15 setups
• NXAMP4x1 and NXAMP 4x4 are Powered Digital Controllers, providing
full control and amplification for RS15 in multiple configurations. Both
devices feature 4 analogue inputs and 4 speaker outputs. When equipped
with optional card, 4 digital inputs in Ethersound
TM digital audio network
format as well as remote control for all units in the network become
available.
For a complete description of these controllers, please refer to User Manuals. The NX242
and NXAMP DSP algorithms and parameters are fixed in software and updated regularly:
Please consult the NEXO web site (www.nexo.fr) for the latest software releases.
Please devote your time and attention to reading this manual. A comprehensive
understanding of RS15 specific features will help you to operate your system at its full
potential.
GeoD Passive mode
Crossover 80Hz