PreSonus V-Fire - Manual (Page 23)

5 ROLAND VS SETTINGS
23
Input to MV-8000
Click on the Sampler menu, and select Sampling.
Click on Input Select, and choose R-Bus.
Output from MV-8000
Click the Mixer/Effects menu.
Click “1 Mixer”.
Click OUTPUT at the bottom of each mixer channel, and select Mlt 1-8 for individual R-Bus
channels 1-8, or M1/2 – M7/8 for stereo pairs of R-Bus channels.
5.7 Roland VM-7000 Series
Digital Clock (Slave)
Press SHIFT+SYSTEM(PROJECT).
Cursor down and press F1 - DIGITAL I/O
Change Word Clock Source to Multi 1-8
Make sure the Internal Sampling Rate matches your computer settings.
[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the
V-Fire digital clock.]
Input to VM Series
The Multi In channels receive digital audio signals from the V-Fire’s R-Bus outputs.
Press the MULTI IN CH1-24 button, verify that each appropriate channel is On and not
muted, then raise the appropriate Multi In channel faders to monitor the incoming audio
signals.