PreSonus V-Fire - Manual (Page 10)

2 INSTALLATION
10
4.) When prompted to restart your computer, do so.
5.) Once the computer has restarted, connect your V-FIRE to the computer via FireWire .
6.) A windows Found New Hardware Wizard should open. Select ‘No, not this time’, when
prompted to connect to the internet for Windows to find a driver. Click Next.
7.) The next window that comes up should identify the PreSonus Driver and allow you to
choose ‘Install Software Automatically’. Click Next.
8.) Click on Finish when the next window opens. You should now see a blue sync light on your
V-FIRE, indicating that it is sync with your computer and ready to use.
Note: The V-FIRE Control Console application can be found in the Start Menu/ All
Programs/ PreSonus Drivers/ V-FIRE CPL.
Mac:
*YOU MUST INSTALL DRIVERS BEFORE CONNECTING YOUR V-FIRE*
1.) Quit all currently running applications.
2.) Insert the Driver CD included with your V-FIRE into your computer. (Do not connect your
V-FIRE to the computer at this time).
3.) CD should auto run.* (If not, navigate to CD and double click on V-FIRE_Installer.exe)
*There are several parts to the installation of your V-FIRE. The installer will take
you through each step. Please read each message carefully as the time at which you