PreSonus V-Fire - Manual (Page 19)

5 ROLAND VS SETTINGS
19
5.3 Roland VSR-880
Digital Clock (Slave)
Press SHIFT+SYSTEM until you see SYSTEM PRM, and press ENTER.
Use Parameter buttons to select the MasterClk screen.
Use the TIME/VALUE Knob to set MasterClk to “R-BUS”.
[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the
V-Fire digital clock.]
Output from VSR-880
Press LEVEL/BALANCE.
Use PARAMETER buttons to select the “MST Direct Out” screen.
Use the TIME/VALUE Knob to set Direct Out to ON.
Input to VSR-880
Press SHIFT + IN MIX (LEVEL/BALANCE).
Use PARAMETER buttons to select the “Input =” screen.
Use the TIME/VALUE Knob to set Input = R-Bus.
To do this for each input, you’ll need to hold SHIFT and press the STATUS button for every
odd-numbered input, one at a time. (Note: The inputs are adjusted in pairs.)
Change each odd-numbered input to R-Bus, …the even-numbered input will also be set to R-
Bus.