PreSonus Temblor T10 - Manual (Page 15)

4 Resources
4.1 Technical Specifications
Monitor Station V2
Owner’s Manual
11
4 Resources
4.1 Technical Specifications
INPUTS
2- Balanced XLR
2- Balanced ¼” TRS
2- Unbalanced RCA
OUTPUTS
2- Balanced XLR (full range with 80 Hz HPF option)
2- Balanced ¼” TRS (full range with 80 Hz HPF option)
1- Balanced XLR (Sub Out)
PERFORMANCE
Frequency Response 20 Hz – 200 Hz
Low Pass Filter Frequency 50 – 130 Hz (variable)
Signal-to-Noise Ratio >98 dB
THD 0.019% @ power <160W
Amplifier Power 170W RMS / 250W Peak
Power Consumption 230W
Amplifier Type Class AB
Peak SPL at 1m 113 dB
Woofer 10” glass-composite
USER CONTROLS
Input Gain Control -30 to +6 dB
Polarity Switch 0° or 180°
Low Pass Filter Control 50 Hz to 130 Hz
Ground Lift Switch On/Off
High Pass Filter Switch On/Off
Bypass Footswitch On/Off
PROTECTION
RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse