Track column — 12, 2 track column, 3the session page 3.2 track column capture – PreSonus StudioLive 16.0.2 User Manual
Page 14: 0 software reference manual
12
3
The Session Page
3.2
Track Column
Capture
™
2.0 Software
Reference Manual
Capture 2.0 Playback Routing
There is no need to set up audio inputs and outputs in Capture 2.0, as the software
automatically detects which StudioLive model is connected (a StudioLive 24.4.2,
one or two 16.4.2s, or a 16.0.2) and auto-configures for it. Each input from the
StudioLive mixer is represented with a mono input track in the Track column
of the Session and has a corresponding level meter in the meter bridge.
StudioLive 24.4.2 and 16.4.2 owners: An additional stereo track will also be added
to the Session for recording the first pair of auxiliary inputs (Inputs 25-26/17-18).
It is possible to process each StudioLive mixer input channel with the Fat Channel
before the input signal is routed to Capture 2.0. To do this, engage the Post button in
the Dig Out section of the Fat Channel for each channel in your StudioLive mixer. This
routes the signal post-EQ and post-dynamics processing.
3.2
Track Column
Along the left side of the Session page, you will find the Track column. The Track
column contains a dedicated audio track for each audio input into Capture 2.0 from
the StudioLive mixer, including a stereo track for StudioLive 24.4.2 and 16.4.2, and
provides the following essential functions:
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input