PreSonus StudioLive 16.0.2 - Manual (Page 60)

56
5.5 Using MIDI Control Mode to Remote-Control StudioLive
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Troubleshooting
and W
arr
an
ty
Digital E
ff
ec
ts
Mast
er C
on
tr
ol
Scene Recall
1. Select Bank 00 by using the Up or Down pedals.
2. Press Pedal 1 to select Preset 1.
3. Press and hold the Down pedal to enter Preset Configuration
mode. (You’ll see a flashing green LED.)
4. Press the Up pedal to confirm.
5. Press Pedal 1 so that the red LED is flashing.
6. Press the Up pedal to make the Program Change assignment.
7. Select Scene 02 using Pedal 2 or Expression Pedal A.
8. Press the Up pedal to confirm.
9. Press and hold the Down pedal to exit.
FXA Preset Recall
1. To set up pedal control of FXA preset changes, press Pedal 3 so that Preset
3 is selected on your FCB1010. Make sure that Bank 00 is still selected.
2. Repeat Scene Recall steps 3-9, using Expression
Pedal A to select FX preset 20.
FXA Assign/Unassign to Main Bus and Main Output Level Control
Let’s create a preset to assign/unassign FXA to the Main bus and to control
the Main output volume using an expression pedal on the FCB1010.
1. First press Pedal 6 to select Preset 6, making
sure that Bank 00 is still selected.
2. Press and hold the Down pedal to enter Preset Configuration
mode. (You’ll see a flashing green LED.)
3. Press the Up pedal to confirm.
4. Press Pedal 6 so that the red LED is flashing.
5. Press the Up pedal to assign the Control Change.
6. Using Expression Pedal A, select CC 64.
7. Press the Up pedal twice to confirm.
8. Press Pedal 8 so that its red LED is flashing.
9. Press the Up pedal to make the Control Change assignment.
10. Using Expression Pedal A, select CC 42.
11. Press the Up pedal once to select the lowest value.
12. Move Expression Pedal A to its lowest position to select 00.
13. Press the Up pedal once to select the highest value.
14. Move Expression Pedal A to its highest position to select 127.
15. Press the Up pedal once to confirm.
16. Press and hold the Down pedal to exit.
Trying Out Presets
• Preset 1 recalls Scene 2 on your StudioLive.
• Preset 3 recalls “F20: High Ceilings” on FXA on your StudioLive.
• Preset 6 allows you to control the Main bus assignment for FXA
(effectively muting and unmuting the effect in the Mains) from
Pedal 6 on your FCB1010. You also can control the Main output
volume for your StudioLive using Expression Pedal A.