3 using solo in place (sip) to set up a mix, 3 using solo in place (sip) to, Set up a mix — 35 – PreSonus StudioLive 16.0.2 User Manual
Page 39
![background image](/manuals/360811/39/background.png)
35
StudioLive™ 16.0.2 Owner’s Manual
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Tr
oubleshooting
and W
arr
an
ty
Con
tr
ols
4.8.3 Using Solo in Place (SIP) to Set Up a Mix
We started this manual with a quick and easy way to set up the input levels
for your StudioLive, ensuring that you have the highest possible input level
without clipping your analog-to-digital converters. The next step is to set up
your mix by dialing in the dynamics, EQ, and fader settings for each channel.
Enter Solo In Place (SIP). As previously mentioned, Solo In Place is a great way
to dial in your mix without disturbing your musicians’ last minute rehearsal
or subjecting your audience to that impromptu jam session on stage.
1. To begin, press and hold the SIP button in the Solo section until it illuminates.
2. Raise all channel faders and the main fader to unity gain.
3. Press the Solo Mode button.
4. Most engineers start with the drums and work from the
bottom up, so press the MultiMode button on your kick-
drum mic channel. Notice that all the other channels on your
StudioLive have been muted, and the kick drum channel is
selected.
The Fat Channel will display the dynamics processing, EQ,
output routing, and pan settings for the kick drum.
5. Using the encoders and meters in the Fat Channel, set up the
compressor and EQ for this channel.
Kick snare Tom 1 Tom2 OH L