Stuart Turner Float Switch - Manual (Page 6)

- 6 -
PRE-ASSEMBLY OF WEIGHTS
The switch assembly includes three weights, the position of which relative to the switch
assembly is important for correct functionality of the switch.
a) Counterbalance weight
This is the heaviest of the three (approx
112 g) and is pre-fitted at the factory as
shown in Fig. 6.
If ever there is a need to remove or replace
this weight, it must be re-fitted with the
chamfer upwards as shown in Fig. 7.
b) Float weight and stop weight
These two weights are the same size (approx
90 g), are supplied loose and are
interchangeable.
The float weight must be assembled to the
float with the chamfer upwards as shown in
Fig. 8.
The stop weight must also be assembled
with the chamfer upwards as shown in Fig. 9.
Fig. 8
Fig. 9
Fig. 5
Counterbalance
weight
(112 g)
Chamfer
Chamfer
Float
weight
(90 g)
Stop
weight
(90 g)
Fig. 6 Fig. 7
Chamfer