Stuart Turner Multistage xxx-30 Series - Manual (Page 2)

- 2 -
Cont ...
PRODUCT DESCRIPTION
Electric motor driven centrifugal pump.
APPLICATION
This range of centrifugal pumps is designed to pump clean fresh water.
The pumps can be used for pressure boosting, fluid transfer and distribution. They are
suitable for flooded suction applications. Alternatively a maximum suction lift of
4.6 metres is permitted when using a Stuart footvalve/strainer (Fig. 4).
Inlet pressures to the pump and ambient temperatures must not exceed the values
given in the technical specifications.

This pump set must not be used for any other
application without the written consent of Stuart
Turner Limited and in particular must not be
connected directly to the mains water supply.

This pump must not be connected directly to the
mains water supply.

This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without
supervision.

Children should be supervised to ensure that they do
not play with the appliance.

This product should not be used for the supply of
water to more than one dwelling (house, apartment,
flat).
Please read installation details carefully as they are intended to ensure this product
provides long, trouble free service. Failure to install the unit in accordance with the
installation instructions will lead to invalidation of the warranty.
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a dry,
frost and vibration free location in its original packaging.