Yokogawa Removable Chassis DX1000N - Manual (Page 9)

8
IM 04L4B0-9E
Settings of the DX
Node Address Settings
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Communication (PROFIBUS).
• Node Address
Set a node address in the range of 0 to 125.
Note
The node address of PROFIBUS-DP can be checked on the Network Information Screen of the
DX. You can open the Network Information Screen by pressing
FUNC > Network info softkey.
Others
Status Output (option, /F1 and /F2)
If setting Communication error of the Status Output (/F or /F2 option) to On, a relay
output is provided when a PROFIBUS-DP communication error occurs within the DX. If
a communication error occurs, contact your nearest YOKOGAWA dealer for repairs.
See Section 2.9 of the DX1000/DX1000N User's Manual (IM04L41B01-01E) or DX2000
User's Manual (IM04142B01-01E).
In Basic Setting Mode:
When the DX is in the basic setting mode, communications are available but input/output
data is invalid.
Connection to the PROFIBUS-DP Network