Yokogawa Removable Chassis DX1000N - Manual (Page 11)

0
IM 04L4B0-9E
Specification of Data
If you install the GSD file, the DX is added to the configuration tool as a "General" type
"Slave". Select [Model] to expand the module list and select your DX model from the list.
Item Explanation
Model The model name described in the GSD file. Select the device to
be configured from the model name of the "General" type and
the "Slave" in the devices tree or list box.
Data Acquisition PROFIBUS I/F
Module The DX models are referred to as modules. Selecting the
model "Data Acquisition PROFIBUS I/F" allows you to select a
module.
DX002 DX002, DX002N, without Option/M and /PM
DX002/M DX002, DX002N, with Option/M or /PM
DX004 DX004, DX004N, without Option/M and /PM
DX004/M DX004, DX004N, with Option/M or /PM
DX1006 DX1006, DX1006N, without Option/M1 and /PM1
DX1006/M1 DX1006, DX1006N, with Option/M1 or /PM1
DX02 DX02, DX02N, without Option/M and /PM
DX02/M DX02, DX02N, with Option/M or /PM
DX2004 DX2004, without Option/M and /PM
DX2004/M DX2004, with Option/M or /PM
DX2008 DX2008, without Option/M1 and /PM1
DX2008/M1 DX2008, with Option/M1 or /PM1
DX200 DX200, without Option/M and /PM
DX200/M DX200, with Option/M or /PM
DX2020 DX2020, without Option/M and /PM
DX2020/M DX2020, with Option/M or /PM
DX2030 DX2030, without Option/M1 and /PM1
DX2030/M1 DX2030, with Option/M1 or /PM1
DX2040 DX2040, without Option/M and /PM
DX2040/M DX2040, with Option/M or /PM
DX2048 DX2048, without Option/M1 and /PM1
DX2048/M1 DX2048, with Option/M1 or /PM1
Communication Connection
You can establish a communication connection by using the configuraton tool and run
it with a PLC. For information on using the configuration tool and a PLC, see the user's
manuals of these products.
Preparation for PLC