Yokogawa HART Communicator YHC5150X - Manual (Page 12)

12
2.4. List of Dialogs
2.4.1. Confirmation Dialog for Creating New Device Maintenance Information
This dialog is displayed when the following three conditions are all met before saving DTM data in
the device maintenance information.
 There is no device maintenance information which corresponds to the device ID of the device
configuration file data to be saved.
 “Create device maintenance information automatically” is not checked.
 There is device maintenance information of the same device type and device revision, but no
device maintenance information which corresponds to the device ID of the device configuration
file data to be saved.
Figure 2-4 Confirmation dialog for creating new device maintenance information
When the [OK] button is clicked, new device maintenance information is created based on the device
ID of the device configuration file, and DTM data is saved.
When the [Skip] button is clicked, the process is skipped.
2.4.2. Dialog for Selecting Target Device Maintenance Information
This dialog is displayed when the following conditions are all met before saving DTM data in the
device maintenance information.
 There is no device maintenance information which corresponds to the device ID of the device
configuration file data to be saved.
 “Create device maintenance information automatically” is not checked.
 There is device maintenance information of the same device type and device revision, but the
device ID is blank.